AGITADOR HEI-TORQUE CORE
Accesories
Accesorio para agitadores de varilla - Portavarillas flexible
Para conexión directa al cabezal portavarillas del agitador. Para varillas de 5 a 8 mm Ø. Compensa axialmente las diferencias de alineación entre el motor de agitación y el cuello del matraz.
Accesorio para agitadores de varilla - Portavarillas flexible
Para conexión directa al cabezal portavarillas del agitador. Para varillas de 6 a 10 mm Ø. Compensa axialmente las diferencias de alineación entre el motor de agitación y el cuello del matraz.
Accesorios para agitadores de varilla - Eje flexible
Permite descentralizar la varilla agitadora del agitador. Consta de un eje flexible de 1,3 m de longitud para acoplar directamente al cabezal portavarillas del agitador, y en el otro extremo incluye un cabezal portavarillas de 8,5 mm Ø para enlazar con la varilla agitadora. Incluye una barra de sujeción. Acepta un par de giro máximo de 150 Ncm. (No recomendado para el agitador RZR-2102 Z Control).
Guía NS 29/32 para varillas
En PTFE, con junta ajustable de PTFE/Viton, para varillas de 8 mm Ø.
Bosshead xl
Maximum opening. For rods 13 to 32 mm Ø.
Bosshead “MAXIM”
For large diameters. Chrome plated with one opening to hold rods up to 30 mm Ø. Second opening up to 20 mm Ø.
Bosshead “SUNTECH”
For retort bars of 5 to 22 mm Ø. With screw clamp joints. Ideal for supporting overhead stirrers.
Double base support T “MAXI”
Rod of AISI 304 stainless steel of 20 Ø x 800 mm high. Designed to support weights up to 20 Kg at 300 mm height from the base. Useful for stirrers. Weight: 7 Kg
DOUBLE BASE SUPPORT T TELESCOPE
Stainless steel base AISI 304 of 32 mm Ø. Telescopic elevation from 725 to 1025 mm. Maximum support weight 20 Kg. Actual weight: 7.7 Kg Compatible with Part No. 5057022 (See page 165).
ADJUSTABLE HEIGHT SHAFT STIRRERS
Shafts made of AISI 304 stainless steel coated in PTFE and PTFE stirrer paddles. Shaft: 7 mm Ø. Adjustable height paddles using a locking thread. Can be used with differing paddles on the same shaft to create a multiple mixing action. Shaft PTFE. Spare or additional paddle for multiple stir effect.
ADJUSTABLE HEIGHT SHAFT STIRRERS
Shafts made of AISI 304 stainless steel coated in PTFE and PTFE stirrer paddles. Shaft: 7 mm Ø. Adjustable height paddles using a locking thread. Can be used with differing paddles on the same shaft to create a multiple mixing action. Helix PTFE.
ADJUSTABLE HEIGHT SHAFT STIRRERS
Shafts made of AISI 304 stainless steel coated in PTFE and PTFE stirrer paddles. Shaft: 7 mm Ø. Adjustable height paddles using a locking thread. Can be used with differing paddles on the same shaft to create a multiple mixing action. Shaft PTFE.
SHAFTS WITH PTFE PADDLES
Shaft of 8 mm Ø.
SHAFTS WITH PTFE PADDLES
Shaft of 8 mm Ø.
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø.
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Turbo helix 66 mm Ø
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Double fly vane.
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Turbo helix 45 mm Ø
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Radial turbine.
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Three hole paddle.
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Six hole paddle.
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Helix.
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø. Double cross vane
STIRRING SHAFTS WITH ROTORS
Shaft with AISI 304 stainless steel rotor. Shaft: 7mm Ø.
SHAFTS WITH ROTORS VISCO-JET®
- Shaft made from AISI 316Cb stainless steel with POM plastic rotor. Shaft: 10 mm Ø. A suitable system for all types of stirring. Dynamic stirring with turbulent flow on vessel walls and bottom. Homogenised liquids and fluids of low viscosity. The fluid is aspirated by the widest part of the cone and is expulsed by acceleration from the smaller Ø, creating in the middle a turbulent effect; prevents the formation of foam, clots, aeration and heating up of the sample, degasses the medium being stirred. Reduces the vortex formed, for short stir periods.
SHAFTS WITH ROTORS VISCO-JET®
- Shafts with rotors made from AISI 316Cb stainless steel. Shaft: 10 mm Ø. A suitable system for all types of stirring. Dynamic stirring with turbulent flow on vessel walls and bottom. Homogenised liquids and fluids of low viscosity. The fluid is aspirated by the widest part of the cone and is expulsed by acceleration from the smaller Ø, creating in the middle a turbulent effect; prevents the formation of foam, clots, aeration and heating up of the sample, degasses the medium being stirred. Reduces the vortex formed, for short stir periods.
SHAFTS WITH ROTORS VISCO-JET®
- Shafts with rotors made from AISI 316Cb stainless steel. Shaft: 10 mm Ø. A suitable system for all types of stirring. Dynamic stirring with turbulent flow on vessel walls and bottom. Homogenised liquids and fluids of low viscosity. The fluid is aspirated by the widest part of the cone and is expulsed by acceleration from the smaller Ø, creating in the middle a turbulent effect; prevents the formation of foam, clots, aeration and heating up of the sample, degasses the medium being stirred. Reduces the vortex formed, for short stir periods.
SHAFTS WITH ROTORS VISCO-JET®
- Shaft made from AISI 316Cb stainless steel with POM plastic rotor. Shaft: 10 mm Ø. A suitable system for all types of stirring. Dynamic stirring with turbulent flow on vessel walls and bottom. Homogenised liquids and fluids of low viscosity. The fluid is aspirated by the widest part of the cone and is expulsed by acceleration from the smaller Ø, creating in the middle a turbulent effect; prevents the formation of foam, clots, aeration and heating up of the sample, degasses the medium being stirred. Reduces the vortex formed, for short stir periods.
SHAFTS WITH ROTORS VISCO-JET®
- Shafts with rotors made from AISI 316Cb stainless steel. Shaft: 10 mm Ø. A suitable system for all types of stirring. Dynamic stirring with turbulent flow on vessel walls and bottom. Homogenised liquids and fluids of low viscosity. The fluid is aspirated by the widest part of the cone and is expulsed by acceleration from the smaller Ø, creating in the middle a turbulent effect; prevents the formation of foam, clots, aeration and heating up of the sample, degasses the medium being stirred. Reduces the vortex formed, for short stir periods.