Baño con equipo termostático “Digiterm-S-150-20”
Bath circulators “Digiterm-S-150-20”
Cuvettes set of 20 l. Capacity, with thermostatic equipment included. Fort temperatures from amb+5 to 150 °c.
Stability: ±0,1 °c. Resolution: 0.1 °c.
APPLICATIONS
SAFETY:
COMMON FEATURES
CONTROL PANEL
Similar Products
Bath circulators “Digiterm-S-150-20”
Ref:3000548
Accesories
Silicone oil 4 liters.
Temperature up to 300ºC. Viscosity 50 mm2/s at 25 ºC. Melting point 318 ºC.
Methacrylate bath - 13 litres
Maximum temperature 60 °C.
Methacrylate bath - 30 litres
Maximum temperature 60 °C.
Methacrylate bath - 8 litres
Maximum temperature 60 °C.
Methacrylate tank “Clinic-Term” 9,5 litres
The methacrylate tank should not be used over 60 °C.
Metal bath - 12 litres
Accessory for DIGITERM-S-150 and DIGITERM-TFT-200. Manufactured with a double external AISI 304 stainless steel skin and an AISI 304 stainless steel pressed bath interior.
Metal bath - 20 litres
Accessory for DIGITERM-S-150 and DIGITERM-TFT-200. Manufactured with a double external AISI 304 stainless steel skin and an AISI 304 stainless steel pressed bath interior. With drain tap and lifting handles.
Metal bath - 27 litres
Accessory for DIGITERM-S-150 and DIGITERM-TFT-200. Manufactured with a double external AISI 304 stainless steel skin and an AISI 304 stainless steel pressed bath interior. With drain tap and lifting handles.
Metal bath - 45 litres
Accessory for DIGITERM-S-150 and DIGITERM-TFT-200. Manufactured with a double external AISI 304 stainless steel skin and an AISI 304 stainless steel pressed bath interior. With drain tap and lifting handles.
Metal bath - 9 litres
Accessory for DIGITERM-S-150 and DIGITERM-TFT-200. Manufactured with a double external AISI 304 stainless steel skin and an AISI 304 stainless steel pressed bath interior.
Stainless steel bath - 9 litres
Thermally insulated. Ideal for low temperatures. Suitable for J.P. Selecta refrigerated units. Similar to our other bath but with additional internal expanded foam insulation that prevents external condensation or heat loss, working temperature range from –40°C to +90°C.
Tube racks for lifting rack support.
For 20 mm tubes.
Tube racks for lifting rack support.
For 16 mm tubes.
Tube racks for lifting rack support.
For 13 mm tubes.
Lifting rack support. Capacity 3 tube racks
ACCESSORIES for the DIGITERM-S-150 and DIGITERM-TFT-200. Made of AISI 304 stainless steel.
Removable constant liquid level - up to 15 cm
Not compatible with gale and Makrolon® lid. Suitable for any type of bath. Adjustable height to obtain the required liquid level.
Removable constant liquid level up to 20 cm
Suitable for any type of bath. Adjustable height to obtain the required liquid level.
Thermometer support with locking screw
Thermometer support with locking screw (up to 40 mm). Only for baths model “PRECISTERM”. Stainless steel, suitable for thermometer.
Probe Pt100
Pt100 temperature sensor with handle 4 mm Ø x 135 mm long submersion. Supplied with a 150cm cable and connector .
Extension support bridge
Made of AISI 304 stainless steel, adjustable, to fit the immersion thermostat models “Tectron and “Digiterm”. Support for apertures from 22 to 44 cm across.
Ring set lid
105, 80, 60 an d37 mm Ø reduction rings and a check thermometer location hole in the lid. Capacity 4 places.
Gable lid
ACCESSORIES for the DIGITERM-S-150 and DIGITERM-TFT-200. Made of AISI 304 stainless steel.
Suitable for “Tectron-Bio” immersion thermostat.
Scale -10 to 100 °C.