Autoclaves for sterilization “Autester ST DRY PV IIl” 150L 400V III 50/60Hz
Microprocessor process control.
Automatic vacuum dry and purge “prevacuum”
programmable temperature from 105 °c to 134 °c (0.21 to 2 bar). Conforms to apparatus pressure regulation directives. Vertical floor standing model
capacity: 150 litres.
Stainless steel wire baskets and drums. AISI 304. For Presoclave lll 50. Capacity, 3 baskets Ø 25 and 20 cm. height Suitable for autoclaves # 4001758-4001770-4002516.
Printer of continuous paper roll with print out of program, temperature, pressure, time and phase. Complements for Autoclaves AUTESTER ST. DRY PV III # 4002516-4002519-4002518 and PRESOCLAVE # 4001770-4001771-4001772. Must be installed at the factory.
2nd Probe for reading sample temperature. To guarantee in all circumstances that the system has completed the cycle to the set time and tempera- ture parameters, the Autester ST DRY PV IIl autoclave can be installed with a temperature probe that can be placed within the culture flask, residual packets etc. When the probe is connected to the controller of the autoclave, it must be selected in settings, whereby the real time temperature values detected by the probe, are displayed and printed. For autoclaves PRESOCLAVE lll and PRESOCLAVE PLUS this Pt100 sensor only reads the temperature with an external thermometer.