1. Home
  2. Catalogue
  4. Drying and sterilization ovens with fan assisted circulation
  5. 2002961

Estufas de secado y esterilización “Dry-Big”

Drying and sterilization ovens “Dry-Big”

Fan assisted circulation.
Digital control and display of temperature and time adjustable temperatures from 40 °c up to 250 °c
stability: ±0.4 °c, up to 100 °c. Homogeneity: ±2 °c, up to 100 °c
set error : ±2.5% of the working temperature. Resolution: 1 °c

SAFETY:

STANDARD EN 61010. FIXED OVER TEMPERATURE DEVICE FITTED. STANDARD DIN 12880. (CLASS 2 AND 3.1)ADJUSTABLE SAFETY THERMOSTAT FITTED. 

Fast working and recovery temperature

FEATURES

1. Microprocessor controlled with digital display of tem- perature and time, pre-programmable time start and run time once the set temperature has been achieved through the Pt100 temperature sensor.
2. Inner chamber made of AISI 304 stainless steel.
3. Pre mixing chamber made of AISI 304 stainless steel.
4. Shielded heating elements with complete air circulation, homogeneously distributed throughout.
5. Low external temperature due to excellent thermal insulation.
6. Ventilation fan to force the air to circulate in the oven.
7. Diagram showing the air flow from the premixing chamber round the heating elements to the oven chamber.
8. Independent insulated control box.
9. Air inlet.
10. Ventilator with adjustable outlet of 120 Ø mm.
11. Shelf guides.
12. Shelves made of AISI304 stainless steel.
13. Flexible silicon door gasket around the entrance of the chamber.
14. Epoxy coated outer case. 

CONTROL PANEL

1. Illuminated mains switch.
2. Temperature mode indicator.
3. Time mode indicator.
4. Display for temperature and time.
5. Operating, Status mode.
6. Delay time state indicator.
7. Push button temperature selector.
8. Push button time selector.
9. Push button “increase” value or parameter.
10. Push button “decrease” value or parameter.
11. Push button Stop/Start.
12. Set temperature.
13. Set run time: time period from 1 minute to 9 hours 59 minutes, or up to 99.9 hours, once the set temperature value has been reached.
14. Set wait time before starting the run, time period from: 1 to 24 hours.
15. RS-232 Interface output to a computer or for printer.
16. Adjustable safety thermostat that overrides the microprocessor in case of failure, with manual reset and
indicator lamp. 

STANDARD EQUIPMENT

2 Shelves. 
CódigoVoltageCapacity litresHeating rate to 100 º C minutesRecovery time* minutesComplete air exchange per hourHeight (interior) cmWidth (interior) cmDepth (interior) cmHeight (exterior) cmWidth (exterior) cmDepth (exterior) cmShelf positionsConsumption wWeight Kg
2002961 230 / 400 threephase 216 16 10 12 60 60 60 87 112 84 6 4000 150
2002962 230 single phase 216 16 10 12 60 60 60 87 112 84 6 4000 150
2002971 230 / 400 threephase 288 18 10 11 80 60 60 107 112 84 8 5000 161
2002972 230 single phase 288 18 10 11 80 60 60 107 112 84 8 5000 161
2003721230 / 400 threephase 400 18 13 6 100 80 50 128 132 74 10 5250 200
2003741 230 / 400 threephase 720 19 13 6 120 100 60 150 152 80 12 6000 264
2003743 380 / 400 threephase 4200 30 13 6 180 175 135 216 231 178 10 11000 1200

Energy saving, three phase units are recommended.
*Recovery time, the door was opened for 60 seconds, time taken to recover to the set temperature of 100 °C. Upon request, large capacity equipment can be manufactured.

Similar Products
Accesories