Estufas de secado y esterilización “Digitheat-TFT”
Drying and sterilization ovens “Digitheat-TFT”
MICROPROCESSOR CONTROL WITH TFT TOUCH SCREEN.
ADJUSTABLE TEMPERATURE FROM AMBIENT +5 °C UP TO 250 °C.
STABILITY: ±0.3 °C, UP TO 150 °C. HOMOGENEITY: ±1 °C, UP TO 150 °C.
SET ERROR: ±2 % OF THE WORKING TEMPERATURE. RESOLUTION: 1 °C.
STANDARD EN.61010. INCORPORATED FIXED OVER TEMPERATURE DEVICE . STANDARD DIN 12880. (CLASE 2 AND 3.1)CONTROLLABLE SAFETY THERMOSTAT FITTED.
Reaches working temperature with minimum delay
1. External case treated with a corrosive resistant epoxy coating.
2. Internal part: Easy to clean AISI 304 stainless steel double chamber, self adjusting door seal and adjustable shelves and guides.
3. Control panel: independent insulated control panel to facilitate all types of instruments, controls and regulators.
4. Adjustable air inlet.
5. Excellent thermal qualities of the insulation has the optimum performance according to heater capacity and power consumption, with minimal external temperature loss.
6. Independent heating chamber for the heating elements to obtain an even heat distribution and rapid temperature equilibrium and stabilization.
Fan assisted convection models have a turbo fan. All incubators for bacteriology and cell culture have a second inner door of tempered glass.
Technology from J. P. Selecta:
7. Adjustable guide and shelf positions.
8. Double seal around the chamber to provide a gentle but effective seal.
9. Floating spring door that adjusts the pressure and absorbs the thermal expansion.
10. Adjustable door pressure system closure. Internal tempered glass door.
For all models, the values for stability and homogeneity shown are based on temperature conditions with the ventilation closed.
The optimum homogenization of temperature within the chamber is based on a reasonable load that does not surpass more than 70 % of the volume of the chamber. The graphic results shown for temperature for each model are based on the above criteria.
Models with digital LED.
1. Main switch.
2. Regulator with digital double temperature display and programmable timer.
3. Security thermostat.
Models with 4.3 inches TFT touch screen.
1. Main switch.
2. TFT touch screen:
Visual audible alarm.
Single or cyclic On / Off programming.
Up to 10 work programs.
Up to 6 segments per program.
Stability time in each segment (from 1 min to 99h ).
Alarms and events storage.
Probe error detection.
Ramps between segments.
Network failure detection and saving.
Over temperature and low temperature alarms and memorization (date, start time, end time and temperature).
Safety thermostat (TS) by software.
Mechanic safety thermostat (TS ).
Temperature control auto-tuning.
Configurable parameters: Date / time, temperature correction , data collection interval, language (English, Spanish and French) , °C / °F selection , over temperature and low temperature limit.
3. RS-232 output.
4. USB output.
5. Security thermostat.
2 shelves and 4 shelf guides.